Orangepaint Factory is your one stop shop for all your custom needs. We can customize anything from cars, trucks, motorcycles, boats, helmets, guitars, or whatever else paint will stick to! Our services include but are not limited to custom paint, airbrush artwork, graphics, murals, pinstriping, flames, metal-flake, pearls, candies, old school flat colors, or anything else you can think of.
If you can dream it, we can make it a reality!
HOK Brandywine Kandy
My new shed finally came in and after installing my exhaust and a new wall my spray booth was almost ready to go. The shed was 12ft by 16ft and would be a better working space than before. Although with all the parts in the booth space would be tight, I would be able to spray the Kandy all at once.
I also bought a new compressor. 80 gallon tank with kickass power. I had to get 220 run to the shed to power it up. Cost me $500 to install but I had power.
This project sat on the shelf for quite a while before I could get to it. The client ordered all the HOK paint. I had put in the quantities for the job but he talked to a tech and he decided to cut the quantities down a bit. It did not pay off because I ran out and he had to order more. I lost a week of work which worked for me. The HOK sprayed like a charm. I primed, sealed and put Zenith Gold down. After a few coats of SG100 I started the artwork. I ended up with a clean Basecoat and art and it was almost time to Kandy with Brandywine. I knew that I could make or break this project and the client was getting anxious.
With the parts all scuffed, cleaned off and on the stands, I took a walk with the dogs to clear my head. I was pushing it off for the fear of screwing up. I was debating painting the kandy in the morning which now that I look back may not have been a good idea. It was dusk when I painted and bugs made their way in the booth. I decided to paint, it was now or never and if I was going to screw up then let it be. I was going to hit it straight on.
The Kandy went on like a charm, I had now streaking or wrinkling but what I was seeing is bugs landing on the paint and some dust debree. I wanted to freak out but there was nothing I could do but finish.
I put down 5 coats of Kandy and then finished of with 3 good coats of clear. The next day I would start the sanding and buffing. I would end up only spraying more clear on half the parts.
Other than the specks the paint job was almost perfect. I had no issues with the HOK and especially the Kandy. They are putting the bike together now and should have new pics on the weekend.
D
Fireman Helmets
Well I finally got started on the fireman helmets. I got an order for six in March but did not start till I got a payment check. Actually when the check came In I was busy painting a bike so I put the helmets on hold.
After finishing the Charity Chopper I started on the Kandy Harley and when a break from running out of paint occurred, I started on the helmets.
Almost at the same time I received a email from the client checking up on the status. I guess it was time to get them done.
The helmets were new and probably could have sanded with 600 grit and then put the Basecoat but I decided to prime to give better adhesion to the plastic.
After the primer was dry I sanded and then put black as the Basecoat and then Clearcoat. Once dry I wetsanded with 800grit wet and the helmet was ready for artwork.
I used Autoair for the artwork and after a couple nights the painting was done. I really appreciate my sign plotter for cutting the firemans cross logo. Without this, it would have taken a crazy amount of hours.
It was time for clear and then final wetsand and buffing. I put the helmet parts back together and one was complete. Client will be picking it up, they wanted me to complete one before I painted them all. I took some artistic liberty to the design but I think the change looks good.
Charity Chopper - DONE
Well I finally put this project to rest. There were many points in this project that I was ready to hang up the gloves. I persevered and the bike looks good.
I must say that it did challenge my sanity and If it wasn't for the daily shot of whiskey at the end of each day, I would be insane.
It was a great learning experience and Because of the issues I have now upgraded the size of my spray booth and my compressor. All in all I am glad this one is done. I believe this one was cursed right to the last minute.
Charity Chopper Done
Well I think this project is finally done. Everything and anything that could go wrong did. It is not one of my best pieces but considering how much frustration was in this project, I think I did pretty well to finish. I will be dropping it off in the morning and I hope all is good. I know the client has not been impressed but I really worked hard on this one to complete and not go insane. This project was a lesson in custom work!
The Nightmare Continues
I delivered the tank, rear fender and the oil tank. It took forever to get done and I still have to wetsand the rest of the parts but the job is finally getting done. The client is not happy but wants a perfect job.
After two weeks of nightmares I came to the conclusion that the clear coat I got was expired and the start of all this trouble. It cost me time and money and I am not sure if I can restore this clients confidence but getting this one under my belt is my first priority.
I am going to take a few days off to clear my brain before I finish. I have spent so many long days on this and I need to stay sane.
d
Charity Chopper Nightmare
So I am still not done this project. After two weeks of anything that could go wrong did, I finally got a couple of good days. The base went down well and I got a good coat of clear.
I had finished the bike but was not happy with the work. I stopped in to drop the pieces off and as I expected headed back home with the pieces. I had more work to do. I spent the next week and the Easter weekend fixing the pieces. I ended up repainting the Basecoat and then finally a new coat of clear.
I was finally able to get rid of the fisheye and other than a few specs that I will sand out, I will be ready to wetsand and put another couple coats of clear before buffing.
Although this has been a trying experience, if I can get this done I will have learned a lot in a short period of time. I have seen the bike and it is amazing. I hope my paint will do it justice.
d
Charity Chopper
This project has been a trialing event. The project came to me and I decided to take it on even though it had a tight deadline it was the project that would bring me huge visibility as a business. I also had a all expense paid hockey tournament on Thursday and I wanted to go.
The custom bike was being donated to raffle off for a childrens charity. It would also bring me credibility with the custom builder and that should bring more work.
I had less than 1 week to paint the bike and it never seems to fail that when I get a rush job, everything else in my life gets chaotic and makes putting a lot of time difficult. The client liked the sketch I made of the bike and although the color scheme was already predefined by the builder, it would look good.
I ended up picking up the paint and it cost mor than anticipated but I got a good price. I was going with Debeers Mercedes iridescent silver and Austin Martin Black with yellow stripes to separate the color. I also went with a harder clear. Although this all sounded good, I had never painted with Basecoat clear. I was using Waterborne paint for my work. I was really unsure of the limitations and most of the experience in all projects is how to fix errors and how far you can push the paint. I would ask a lot of questions and the paint actually gave me a good window for custom work.
I was to pick up the bike on Friday by lunch so that I could start painting. I was checking my equipment that week and noticed that my spray booth fan was not working so on wednesday iBook it apart and tried to clean it up. To no avail I a could not get it working. I checked out a few shops and could not find another fan. I would have to drive to Moncton(2hr) to pick one up. Searching on kijiji I found a spraybooth fan but it was in Halifax(4hr away). He also wanted $475 but I managed to talk him down to $300. I would drive down later today to pick it up, time was ticking and I could not spare the time.
I pulled in to the bike shop to pick up the parts but they were still working on it. It would not be ready till morning. No big deal I had to go get the fan anyway.
I was on the road by 5:00 and I was expecting about a 8 hr drive. I wasn't on the road long and it started to rain, then some freezing rain. The roads were pretty good but it was a little slower. Within 2 hrs the weather had cleared and it was clear sailing till Halifax. I picked up the fan and headed back for home. The weather was starting to turn again and it was freezing rain/snow again. The drive home was much slower and I tucked in to bed at 3:00 am.
I was up at 8:00 am trying to see if the fan worked. I pulled open the wiring box and there were about nine wire. I started to panic, i wasn't sure if this would work. I played around for a bit and got the fan connected to electricity and it kicked in. This one was much stronger than the old one.
I then took off to pick up supplies, and then the bike parts. Now that the fan worked I had to design a new vent system for the new fan. By lunchtime I was sanding the bike. The bike had a lot of custom pinstriping and it all had to come off. My plan was to do some minor bodyfill and prime by Sunday night but it would not be until Monday.
Sunday I spent the day sanding and later In the day set up the fan system. It took over an hour for each piece and my shop was slowly getting dustier. I am not really set up for bodywork or a lot of sanding. I also went and picked up 3 new stands that I had gotten built. They were not exactly what I was looking for but would do the trick.
By Monday night I had the bike primed, this takes a little longer for me because when I built my spraybooth I made it too small. I built it to paint helmets and bike parts but did not appreciate the space required. I do now!
I started sanding the primer on Tuesday and it was taking me almost an hour to do each piece. I probably could have used a heavier grit sandpaper to speed the sanding process up a bit but I did not have a lot of experience in this and probably did more sanding than required.
Wednesday was Basecoat day, I needed to start laying down the color. I had decided to lay down the silver first, then the black and finish with the yellow. I spent Wednesday painting the silver and then let it dry. This can be slow if you can only paint a few pieces at a time. The unluck gods would hit me again, as I was bringing the tank in the spray booth It fell off the stand and after bouncing off my foot hit the ground. The language that came out was not good and I would again use this language a few more times in this project. I had a few deep scratches but no dent. A few hours later I was ready to prime again and sand. It could have been worse.
I also took the time to enjoy my new spray gun that I picked up at the Airbrush Getaway (IWATA 400) and was I impressed. It worked like a charm and with the Kustom lab courses took, my painting skill was much improved.
Thursday I started to mask off the pieces to get ready to paint the black. This paint worked really well, I could mask in 30 min if required. By this point I had already passed the clearing threshold but had learned how to quickly fix errors with the Basecoat. The process was a little slower than I had hoped I was barging through.
It wasn't till after supper on Friday that I started laying the stripes and this took way longer than expected. I worked through the entire night and had finished all the yellow by lunch on Saturday. I was hoping to have this all done by Friday and cleared so it would give me time for issues and or buffing. I did not have a lot of time left, they want the bike on Monday. My clear would have to be perfect and again, new gun, new clear and I was not sure how my compressor was holding out. It is really too small for this work.
I mixed up this new clear and started clearing the front fender, worked great. I then sprayed one coat on the side panels and when i came back to put a second coat, the clear was splatting to create a rough surface and it looked like the the gun was clogged. I quickly grabbed another gun, poured the clear in and tried that one. Same effect and I would soon find out that the pot life of this clear was not 3 hrs like the directions stated. I was just over an hour in. After spending a hour cleaning both guns, I would adjust my batch size so this wouldn't happen again.
I finished clearing the parts by 7:00 pm but I had been up for over 24 hrs, I was a little tired. This was the third late night and errors can happen when you are tired or work too fast. This is something that this job showed me very clearly. I sat on the couch sipping a couple whiskeys with the wife and 2 dogs, something that I had not done in a week.
I was up at 5:00 am on Sunday, I was flying to Kingston at 11:20am and wanted to wet sand buff a couple of pieces. At this point I was Disappointed in the work and figured that after delivering the pieces, my name would be mud. I started with the front fender and took it real slow, I did not want to burn through. I first tried the buffer with a compound but realized I would have to wetsand with a 1000 grit and then compound and finish with polish. At this point I started to feel good about the job and if I could buff all the pieces the job would look great. Before i had to leave for the airport I managed to buff the rear fender and the tank and I was really impressed with the job. I had never gotten this kind of clear before and it was exactly what the custom builder had wanted. He made a point of letting me know and had not found a local painter to paint this way. He was sendings his stuff to Montreal to get this clear.
Again the gods that be hit me again. In my attempt to speed up, as I turned I lightly hit the side and put a ding in the tank. Insert language here!
So I am on the plane writing up my experience with this project and trying to make sense of it all, get a good product to the client on time and decide on my next step. Tomorrow I will call and let him know that the bike isn't read. Not only that but because I am out of town, the delay will be longer. I don't think it's in his best interest to take it now although it is painted and cleared. It just doesn't look profession enough and it needs to. I will get my wife to bring a piece to show him so he feels he is getting a good product and that may help. If I can get the time I am confident that they will be happy and the bike will be sick.
d



















